|
| Wednesday | WE-C930-GePD-F7-1 : 3D Printed Patient-Specific Mould for HDR GYN Treatment
S.Wadi-Ramahi*, N.Jastaniyah, C.Constantinescu, A.Nobeh, F.DeBlois |
|
| Wednesday | WE-C930-GePD-F7-2 : Characterization of Patient-Specific 3D-Printed Bolus for Radiotherapy of Head and Neck Malignancies Involving Skin
D.Campos*, B.Dyer, C.Wright, D.Hernandez, S.Lucero, T.Yamamoto,
J.Perks, A.Bewley, S.Rao |
|
| Wednesday | WE-C930-GePD-F7-3 : Development of Novel Heterogeneous Anthropomorphic Head and Neck Phantom Using 3D Printer for IMRT Patient Specific Quality Assurance
N.Kadoya*, K.Abe, H.Nemoto, K.Sato, Y.Ieko, K.Ito,
Y.Takayama, T.chiba, S.Dobashi, K.Takeda, K.Jingu |
|
| Wednesday | WE-C930-GePD-F7-4 : Dose Calibration of Gafchromic EBT3 Film for Ir-192 Brachytherapy Source Using 3D-Printed ABS Plastic
C.Oare*, E.Ehler, D.Sterling, D.Mathew, C.Wilke, C.Ferreira |
|
| Wednesday | WE-C930-GePD-F7-5 : Validation of Patient-Specific 3D-Printed Bolus Caps for Clinical Use in Total Scalp Irradiation
G.Baltz*, P.Chi, P.Wong, C.Wang, D.Craft, S.Kry,
S.Lin, A.Garden, R.Howell |
|
| Wednesday | WE-C930-GePD-F7-6 : Energy Response of Thermoluminescent Dosimeters in 3D-Printed Mouse Phantoms for Kilovoltage X-Ray Beams
N.Viscariello*, C.Hammer, K.Kunugi, L.DeWerd |
